Crystal oscillators SG-8200CJ and SG-8201CJ using low-noise decimal N-division PLL technology

Nov 29,2024
22 VIEWS

The crystal oscillators SG-8200CJ and SG-8201CJ adopt Epson's new low-noise decimal N-division PLL technology. Compared with the previous generation Epson programmable crystal oscillators, the stability has been improved by about 2 times, and the phase jitter has been reduced by<1/25.

SG-8200CJ and SG-8201CJ can be programmed to any frequency from 1.2MHz to 170MHz, with a working temperature range of up to 125 ℃. The SG-8200CJ and SG-8201CJ are highly suitable for various consumer and industrial applications that require small size and/or operation in harsh environments.

features

● Crystal oscillator (programmable)

●Output frequency: 1.2MHz to 170MHz

●Output: CMOS

●Power supply voltage: 1.62V to 3.63V

●Frequency tolerance, operating temperature:

SG-8200CJ: ± 50 × 10-6/-40 ℃ to+125 ℃

SG-8201CJ: ± 15 × 10-6/-40 ℃ to+105 ℃

± 25 × 10-6/-40 ℃ to+125 ℃

● Phase jitter: 1.1ps typical value

(Bias frequency: 12kHz to 20MHz, fo=125MHz)

Outline drawing

Product Name/Product Number

(1-1) Product Name (Standard Format)

SG-8200CJ：X1G006211xxxx16

SG-8201CJ：X1G005981xxxx16

(1-2) Product number/ordering code

absolute maximum rating

scope of work

The power start-up time (0% VCC → 90% VCC) should be between 5 μ s and 500ms

*A bypass capacitor with a capacitance of 0.01 μ F to 0.1 μ F or higher should be connected between the VCC and GND pins near the device

Frequency characteristics (unless otherwise specified [3] operating range)

*Frequency tolerance includes initial frequency tolerance, frequency/temperature characteristics, frequency/voltage coefficient, frequency/load coefficient, and frequency aging (+25 ℃, first year)

*Frequency aging is estimated based on environmental reliability testing; Expected frequency variation. This is not a guarantee within the product lifecycle.