Epson programmable chip oscillator SG-8101CB code X1G005201004600

    Epson crystal oscillator, SMT crystal oscillator, SG-8101CB crystal oscillator, EPSON programmable crystal oscillator, small-sized TCXO temperature compensation crystal oscillator. The internal chip welding mode adopts high-precision dispensing technology, and the position and size of the chip glue points are accurate and consistent. Through image recognition and the use of high-precision digital positioning system, the precision of the chip glue point is within+0.02mm, ensuring the accuracy and stability of TCXO crystal products and good performance. The VC-TCXO series of pressure controlled temperature compensation crystal oscillators adopts a high-precision dispensing technology for the internal chip welding mode. The position and size of the chip glue points are accurately positioned and consistent in size. Through the application of image recognition and high-precision digital positioning system, the dispensing accuracy of the chip is within+0.02mm.

    VCX0 voltage controlled crystal oscillator output waveform and parameters: The output waveform and parameters of VCX0 voltage controlled crystal oscillator are basically the same as those of ordinary quartz crystal oscillator 0SC. The linearity of VCX0 voltage controlled crystal oscillator can be expressed in two ways: percentage% and unit voltage frequency change PPI/ Vo1t。 The typical indicator requested by customers is%. VCX0 voltage controlled crystal oscillator Tri state (enabled/disabled): VCX0 voltage controlled crystal oscillator also has Tri state function (enab1e/disab1ed). In DIP VCX0 voltage controlled crystal oscillator, there is only 4 pins, so there is no Tri state function. In PCB VCXO and SMD VCXO, there is Tri state function, which is pin 2. (Previously, some customers also proposed that 5 # is a three state control pin). Conventional active crystal oscillator bases can meet the requirements.