EPSON X1G004171003500 SG-210STF signal processor specific crystal oscillator

In the intelligent electronic product industry, in order to achieve stable and accurate operation of program instructions issued by the video signal processing MCU in the drone camera module, an external small-sized and low deviation 27MHz active crystal oscillator design scheme is generally required. To prevent the deviation signal output by the 27MHz reference clock from being amplified by the clock timer and PLL in the video signal processing MCU, which may cause signal reception distortion and interfere with normal signals, it is recommended to be less than 3ps, At the same time, small-sized packaging is also needed to meet the requirements of miniaturization design.

For the MUC design requirements of the drone camera module, we recommend an Epson crystal oscillator company to produce X1G004171003500 active crystal oscillator. This active imported crystal oscillator has a frequency of 27MHz and is packaged in a 2520 small-sized metal surface package. It supports multiple voltages of 1.60-3.63V and can meet low-power design requirements. The frequency tolerance is ± 50ppm, and the operating temperature range is -40 ℃~85 ℃. When the X1G004171003500 active crystal oscillator is powered by Vcc=3.3V at room temperature of 25 ℃, the maximum is only 1.8ps, The peak to peak jitter is up to 16ps, with excellent low jitter characteristics.

The SG-210STF crystal oscillator can meet the accuracy requirement of 50ppm at operating temperatures of -40~85 ° C, and can reach the high-precision requirement of 25ppm at operating temperatures of -20~70 ° C. It usually has better frequency offset accuracy in drone camera MCU systems and servers. The power consumption of the SG-210STF crystal oscillator is generally 50MHz and below, and the power consumption can be maintained within 2.7mA within the preset range, working in fundamental mode, SG-210STF operates in fundamental mode instead of overtone crystal oscillator, making it more stable.